PE Valve

  • Increase font size
  • Default font size
  • Decrease font size
Home Hot Gas Defrost 1312-1 Valve
PDFPrintE-mail
106-2 ValveAllen wrench set

1312-1 Valve
View Full-Size Image


1312-1 Valve



Ask a question about this product

3 way valve, 36 to 56 tons, 1-5/8" ODF connections
1300 Series 3 way Valves 3 to 175 tons 1/2" thru 3-1/8" Line Sizes

 

This series valve is available as a pressure differential pilot actuated valve as

well as an Actuator driven valve

 

In the NORMAL POSITION the C and NC ports are open through the valve and the NC port is closed off inside the valve. Discharge pressure must be supplied to the 1/4" flare on the side of the valve. The 1/4" flare fitting at the pilot (below the coil) must be piped to the suction side of the compressor. In the ENERGIZED POSITION the C and NC ports are open through the valve and the NO port is closed off inside the valve. This diagram is a typical hot gas defrost configuration.

1300_flow1300_series_catagory